FAQ
Questions, answered.
The things facility managers, operations teams and contractors ask us most about raised access floors.
The basics
What is a raised access floor?
A raised access floor is a floor built on adjustable pedestals above the structural slab. The space underneath carries power, data cabling and, in many buildings, conditioned air. Removable panels let you reach anything below without tearing up the floor.
What kinds of buildings use raised floors?
Data centres and server rooms, hospitals and labs, trading floors and financial operations centres, schools, government buildings and control rooms, and commercial offices and industrial facilities — anywhere that needs flexible power, data or airflow under the floor.
What size are access floor panels?
The industry standard panel is 24 × 24 in (600 × 600 mm). Panels come in solid, perforated and grated versions, with different load ratings and finishes depending on the system.
How high can a raised floor be?
It depends on the system and what needs to go underneath. Floors range from low-profile installs for cabling only to deep plenums for underfloor air. We'll confirm the right finished height with you and your engineer before we start.
Which systems do you work with?
We install new systems and work on existing floors from most major manufacturers. If you have an older floor, send us photos or the manufacturer name and we'll confirm parts and compatibility.
Working on site
Can you work in an occupied building?
Yes. We phase the work so only a small area is open at a time, schedule around your operations, control dust, and follow your site's security, escort and infection-control procedures.
Can you work in hospitals and secure buildings?
Yes. We follow each site's infection-control, security and escort requirements, and plan the work around patients, staff and public access.
Do you work nights and weekends?
Yes. After-hours, weekend and school-break work is common and can be built into your quote.
How do you make sure the floor is level?
Pedestals are set to height and the floor is checked as we go, then given a final level check before sign-off. The tolerance is confirmed with you up front.
Is the floor grounded?
Raised floors are normally bonded to the building's grounding system, especially where there's sensitive electronic equipment. We coordinate with your electrical contractor so bonding is completed to code.
Repairs & changes
Why are my floor panels rocking?
Usually a pedestal has shifted or lost adhesion, a panel is worn or damaged, or debris is caught under a corner. We find the cause, re-level the area and replace failed parts.
Can you move perforated tiles to improve airflow?
Yes. We can relocate or add perforated and grated panels to match your equipment layout, and blank off openings where air is escaping.
Can you cut cable openings in existing panels?
Yes. We cut clean openings and fit grommets or edge trim so the opening is safe and airflow stays sealed.
Quotes & timing
How much does a raised access floor cost?
Cost depends on floor area, finished height, panel type and load rating, site access, and whether the building is occupied. Send us your room size and drawings and we'll provide a detailed quote.
What areas do you serve?
All of Ontario, including Toronto and the GTA, Ottawa, Kitchener-Waterloo, Hamilton, London, Guelph, Barrie, Kingston, Windsor and Northern Ontario.
How quickly can you start?
Repairs and small changes can often be scheduled quickly. New installations depend on material lead times and your construction schedule — we'll give you a realistic start date with your quote.